Fits Porsche 914; all years
Includes 2 turnsignal boards. attachment clips, and screws for installation. Board color is BLACK.
Replaces turnsignal bulb and sidemarker bulb.
The sidemarker LEDs are RED color to be consistent with US DOT standards where the rear sidemarker should be red.
When changing to LED turnsignals, the flasher relay may not work correctly. To test your flasher, remove one of the front or rear turnsignal bulbs; start engine and activate that side turnsignal. Check for proper flashing (1 flash/sec) and that the indicator(s) in the tach are working correctly. If OK then your flasher is LED-compatible. If not, select a version of the EP26 on this page to match your tach arrangement (1 L/R indicator or separate L & R indicators).
top of page
bottom of page